Application instructions: 1) Degrease the area with isopropyl alcohol or window cleaner. 2) Press the transfer film with a squeegee or card to remove air bubbles. 3) Carefully remove the white backing paper — the sticker should remain on the transparent transfer film. 4) Apply the sticker to the desired spot and press firmly with the squeegee or card; wait 5–10 minutes before removing the transfer film. 5) Gently peel off the transfer film. Do not wash the applied surface with a jet of water for 1–2 days. Avoid applying stickers immediately after a car wash if wax was applied, as the sticker may stick to the transfer film; in that case, carefully reposition so the sticker adheres properly. Coats of Arms Stickers & Phosphor Strips