Level Wedges Alignment Tile Spacers Kit for Flooring Wall Tile Leveling System Leveler Positioning Locator Construction Building Tools with Wrench
Feature:
Wear-resistant, reusable.
Easy to use for DIY operation.
Keep the tile balance on the same horizontal position.
Improve tile installation speed.
Reduce installer fatigue/stress.
Virtually lippage free, flat surface drastically.
Reduces the need for grinding and polishing.
Prevents tiles from moving while curing.
Specification:
Material: PP + 430 stainless steel
Suitable spacer: 2mm-8mm/0.08-0.31in
Tile thickness: 5mm-20mm/0.2-0.79in
With 3 packs of tile leveling crosses of different specifications, it is suitable for more different occasions:
Leveling cross: specification 1.0mm/0.04in, thickness 2.5mm/0.1in, length 22mm/0.87in, Scope of application: seamless tiles, polished tiles
Leveling cross: specification 2.0mm/0.08in, thickness 2.5mm/0.1in, length 22mm/0.87in, Scope of application: wall tiles, tiles
Leveling cross: specification 3.0mm/0.12in, thickness 2.5mm/0.1in, length 23mm/0.91in, Scope of application: antique bricks, outdoor bricks
Using Tip:
1.Paving the first tile, leaving an appropriate distance (use with cross spacer). Close to the tiles.
2.Insert T-shaped needle along the gap in the tile.
3.Then 180 degree rotation,T-shaped needle stuck at the bottom of the two tiles.
4.Adjust the caps with your hand/special wrench until the two tiles are on the same level.
5.About 4-6 hours after leveling, Before cement/adhesive is completely dry, rotate caps in the reverse direction, remove 180° T-needle until the word, take out.
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-3mm measuring deviation due to manual measurement.
326Pcs:
25 X Tile Levelers
1 X Wrench
100 X 1mm Leveling Cross (1 Pack)
100 X 2mm Leveling Cross (1 Pack)
100 X 3mm Leveling Cross (1 Pack)
|
شحن 
إرجاع 
دفع آمن
