AXTH Screwdriver, 37in1, Gray

Product description

The hardness of the tips determines how long a set of tools will last, and in this case, we are talking about s2 steel with a hardness of over hrc65. The axth 37-in-1 precision tool set covers the disassembly, repair, and maintenance of electronic equipment with interchangeable heads. The material is important for small profiles, where the edge is first cut and then begins to wear down. This is the kind of kit you buy once and use for years, as long as you keep it clean. What does s2 steel mean when used for precision components? The s2 hotel is chosen for small-tipped tools precisely because it holds the edge firmly under pressure. With a hardness exceeding hrc65, the screw heads are more resistant to torsion and do not flatten after a few dozen screws have been tightened. With a profile of just over a millimeter, the difference becomes immediately apparent in practice. High hardness comes with a caveat: don’t use your head as a lever and don’t twist it from side to side. Hard materials are resistant to wear, but they don’t forgive bending.

rotate it in the axle and let the pressure do its job.

work order on the bench. These 37 configurations cover the usual range of products, from telephones to small office equipment. First, choose the head based on the profile, then check the size by trying it on without putting any pressure on it. You only start to protest after you’ve been standing still for a while. We have a tray with compartments, and we place the screws in groups, in the order they will be removed.

the assembly is placed back where it came from, because the lengths vary between different areas. A screw that goes in too short will tear exactly where it shouldn’t.

cleaning and lifespan. After working with flux, wipe the ends with a dry swab, as residue can corrode the metal over time. Put each end back in its place and close the case so they don’t rub against each other. The storage area must be dry and free from steam and moisture.

regularly check the tips in good lighting and discard any that have rounded edges. A worn-out head is visible after it comes out of the screw when normal pressure is applied. Replacing it costs much less than removing a broken screw. In short.

in the package: bits / screwdriver bits.

Additional info

• EU Responsible details are here.
• A maximum of 10 units of this product can be ordered. Trendyol reserves the right to cancel orders over 10 units.
• Sold and fulfilled by
  GSM Boutique
  .
• Barcode No: G382244