Bison Polyurethane foam 300ml
No reviews yet.
7.58
€
(incl. VAT)
Free shipping
Estimated delivery: 11 - 13 November
Shipped from: Romania
Delivery partners:
DPDExpress OneEcontSpeedy
Trendyol's commitments
Easy and free return in 30 days.
Payment methods
Highlighted features:
Bison Polyurethane foam 300ml features
Product Safety / Hazmat Info
Not Hazardous
Adhesive Type
Foam Tape
Instructions for Use/Warnings
wear gloves, goggles and protective equipment. Surfaces must be clean and degreased. For faster fixation, moisten surfaces with water before application. Shake the can vigorously before use (at least 20 times). Attach the applicator holding the can vertically. Hold the can upside down and operate the trigger. Fill spaces only halfway with foam; large cavities should be filled by applying successive layers of foam, moistening the previous layer before applying the next. After use, keep the can vertical with the nozzle upwards and clean the applicator by pressing the trigger until the tube is empty. Non-sticky to the touch after 8–10 minutes. Curing time: 1 hour. After curing, the foam can be cut, sanded and painted. When applied outdoors, the foam should be protected with a layer of acrylic paint.
Bison Polyurethane foam 300ml reviews
No reviews yet.
Product details
Product description
Polyurethane foam 300ml
Additional info
- EU Responsible details are here.
- Please refer to the actual product packaging or the user manual for information regarding storage conditions.
- A maximum of 10 units of this product can be ordered. Trendyol reserves the right to cancel orders over 10 units.
- Sold and fulfilled by .
- Barcode No: 4719512059037431
Bison Polyurethane foam 300ml features
Product Safety / Hazmat Info
Not Hazardous
Adhesive Type
Foam Tape
Instructions for Use/Warnings
wear gloves, goggles and protective equipment. Surfaces must be clean and degreased. For faster fixation, moisten surfaces with water before application. Shake the can vigorously before use (at least 20 times). Attach the applicator holding the can vertically. Hold the can upside down and operate the trigger. Fill spaces only halfway with foam; large cavities should be filled by applying successive layers of foam, moistening the previous layer before applying the next. After use, keep the can vertical with the nozzle upwards and clean the applicator by pressing the trigger until the tube is empty. Non-sticky to the touch after 8–10 minutes. Curing time: 1 hour. After curing, the foam can be cut, sanded and painted. When applied outdoors, the foam should be protected with a layer of acrylic paint.
Safety information
Product safety information
Warranty information
