Cabletech Programmable remote control for gate automation with 4 buttons

Product description

Programmable remote control for gate automation 4 buttons compatible with beninca devices Replacement remote control for Beninca pilots, without the need to change the radio, the remote control will work with any device supported by this system The remote control must be programmed in the same way as the original remote control: 1. Press the PILOT UR0402 key selected for operation and hold the key for 5, 6 seconds 2. The three press Beninca pilot working sequence seconds (second hold down the remote control button, second gap, a second hold down the remote control button .

etc) 3. Then a second remote control button PIL0402 After about 10 seconds, the remote control will work Note: during programming, you are within range of the receiver (close to the gate) You can also program the remote control directly to the radio To do this, press the teach button on the radio for 1 second and then the selected button on the remote control for three seconds

Additional info

• EU Responsible details are here.
• Please refer to the actual product packaging or the user manual for information regarding storage conditions.
• A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
• Sold and fulfilled by
  CMCShop
  .
• Barcode No: 5901436785651
• Origin: CH