DJI Mic Mini (2Tx+1Rx+Charging Case)

Product description

1.Measured using dji mic mini (2 tx + 1 rx + charging case) paired with a fully charged charging case, with noise cancellation off during close-range audio recording under interference-free conditions, both transmitters connected to the receiver, and receiver connected to a camera via camera audio cable (3.5mm trs).

2.Dji mic mini transmitters can be directly connected to specific dji products (one tx for osmo action 4, and up to two txs for osmo pocket 3 and osmo action 5 pro). The working time of the transmitter is about 7 to 8 hours when connected directly. Additional dji products will be supported in the future.

3. Powerful and basic levels of noise cancellation via the dji mimo app or dji osmoaudio™ An osmo action 5 pro connected to one or more transmitters via direct connection can be set directly from the product interface when using osmo action 4 or osmo pocket 3. When the transmitter is directly connected to a smartphone, the noise cancellation level cannot be set in the mimo app, it defaults to powerful.

4. When the transmitter is used in conjunction with the receiver, the automatic limitation is enabled by default and can be turned on or off through the dji mimo app

When the transmitter is directly connected to a smartphone via bluetooth, this feature is enabled by default and cannot be turned off. This feature is for dji osmoaudio™ An osmo action 5 pro connected to one or more transmitters through direct connection can also be turned on or off directly from the product interface while using osmo action 4 or osmo pocket 3.

5. The weight of a single transmitter does not include the clip magnet.

6. Measured using dji mic mini (1 tx + 1 rx) when near-distance audio recording under non-interference conditions, when the transmitter is connected to the receiver and the noise cancellation is off when the receiver is connected to a camera via the camera audio cable (3.5mm trs).

7. The battery levels of the transmitters and the receiver are below 25%, using a 5v output charger, with noise cancellation off, close-range audio recording under non-interference conditions, while both transmitters are connected to the receiver, and the receiver is connected to a camera through the camera audio cable (3.5mm trs) measured in a controlled environment.

8. Measured in a controlled test environment.

9.This feature is only effective when the device is powered on. If the automatic shutdown feature for the transmitter and receiver is enabled in the dji mimo app, both devices will automatically shut down if no pairing signal is detected after 15 minutes.

10. It is measured in an open, barrier-free and interference-free environment and is for reference only.

11. Please refer to the download pages on the official dji mic mini webpage for a list of compatible devices.

12. If your phone uses a lightning interface, the receiver cannot be powered by the phone battery without an external power supply. You need to purchase the dji mic mini phone connector (lightning) separately to enable simultaneous charging and use.

13. When connecting directly to a smartphone via bluetooth, it only supports filming via third-party applications. Please refer to the product page on the official website for a list of compatible applications.

14. When using an ios mobile device, dji mic mini firmware updates are only supported via bluetooth, not via usb-c or lightning connection.

Additional info

• EU Responsible details are here.
• Please refer to the actual product packaging or the user manual for information regarding storage conditions.
• A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
• Sold and fulfilled by
  Vexio
  .
• Barcode No: 4719512058753004
• Origin: CH