Huawei Smart Meter - Single-Phase - 100A -

Product description

- - ATTENTION - - SHIPPED ONLY WITH INVERTER !! The Huawei DDSU666-H power sensor is a single-phase current sensor for connection to an inverter. It is easy to use and read thanks to the built-in LCD screen. In addition, the component supports RS485 communication, allowing measured values to be evaluated remotely. Commissioning the current sensor for photovoltaic systems is simple and safe - the digital expert will guide you through the integration process. Once installed with a single click, the component meets the highest requirements. The DDSU666-H smart power sensor is designed for industrial use and is exceptionally reliable. The technical data of the sensor is also important. The power consumption is less than one watt - so the device operates without consuming large amounts of the generated energy. The operating temperature is between -25 °C and +60 °C, and the relative humidity can range from 5 % to 95 %. The dimensions of only 100 x 36 x 65.5 mm make it easy to place anywhere. It is mounted on a DIN35 top-hat rail. The input voltage is 176 VAC~288 VAC (phase / N). In operation, the DDSU666-H Smart Power Sensor achieves a measurement accuracy of +/-1 % (current, power, and energy) and +/-0.01 Hz (frequency). The current sensor thus belongs to accuracy class &gt

1. It is supplied with the necessary accessories, namely a foldable current transformer with a 5 m cable length and an RS485 cable with a 10 m length. Single-phase smart power sensor

Voltage 176-288 Volts

Accuracy class &gt

1

Easy operation via LCD display

Power consumption ≤1 W

Communication via RS485

Huawei DDSU666-H Smart Power Sensor - General Data Operating temperature range: -25°C ~ +60°C

Relative humidity: 5 % RH~ 95 % RH

Dimensions (L x W x H): 100 x 36 x 65.5 mm

Mounting type: DIN35 rail

Weight (including cable): 1.2 kg

Power supply system type: 1P2W (single-phase)

Input voltage: 176 VAC~288 VAC (phase / N)

Power consumption: ≤ 0.8 W

Communication: RS485

Huawei DDSU666-H Smart Power Sensor - Communication Interface: RS485

Transmission rate: 9,600 bps

Communication protocol: Modbus-RTU

Huawei DDSU666-H Smart Power Sensor - Measurement Range Phase voltage: 176 Vac ~ 288 Vac

Current: 0 ~ 100 A

Additional info

• EU Responsible details are here.
• A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
• Sold and fulfilled by
  rali-pieseauto
  .
• Barcode No: 4358825B5EGP9MOG2