Knipex Articulated Chisel 71 01 200

Handle thin dip isolated shear capacity medium hard wire shear capacity hard wire Cutting capacity soft wire cutting capacity piano wire (hardest wire)

Product descriptions

- knipex-cobolt, chisel with compact articulation (center chisel with lever) patented,knipex compact

The articulated chisel is a smart force warehouse. The new transmission mechanism offers an extremely suitable arm ratio and significantly reduces friction. The cutting applied to the material is 20 times the force exerted by the hand. Provides 61% force savings

With the knipex-cobolt tool a 2,0 mm thick piano [to cut the hand, the same

The value of 499 n (49.9 kp) to be applied in the cut to be made with the side cutter on the length

Only a force of 192 n (19.2 kp) is required instead of force, soft,

Precision cutouts for hard wire and piano wire, pin, nail, up to 5.2mm in diameter

Rivets etc. It cuts materials like, thanks to the new arm design, less force is applied. Despite being done, especially high cutting performance, in addition to cutters, induction

Hardening has been applied, cutting hardness is approx. 64 hrc. You should pay attention to the cutting capacity when using a jointed chisel. If you work at a value higher than its cutting capacity, you will damage the cutting edge of the product. For example, in this product, the maximum cutting capacity on a hard wire-piano wire is 3.6mm. When cutting the work tool, position it at a 90-degree upright position and make the cut, otherwise you will damage the cutting edge.

Technical specifications

Article number: 71 01 200 Ean: 4003773033165 Pliers: black atramentized Handles: plastic coated Weight: 335 g Dimensions: 200 x 41 x 15 mm Access: yes

Rohs : no

Style : 0 Soft wire cutting capacity (diameter): ø 6 mm Moderate hardness wire cutting (diameter) : ø 5.2mm

Hard wire cutting capacity (diameter) : ø 4.0 mm

Cutting capacities piano wire (diameter) : ø 3. 6 mm