MEFATECH PROZIN XMODEL TACTICAL SNOW CHAIN

It consists of long-lasting steel chains that are extra hardened against wear and are connected to each other by welding. It is generally used in passenger cars and light commercial vehicles. thanks to its cross pattern, it provides maximum traction and brake safety against side and forward collisions. While the vehicle is not moving, the chain is fully attached to the tire surface with a practical tensioning system. Chain installation should be done on the front two tires for front-wheel drive vehicles, on the rear two tires for rear-wheel drive vehicles, and on the front two tires for four-wheel drive vehicles. how is a snow chain installed? In general, it is necessary to perform the snow chain operation once or twice a year. the chain should be properly tightened while being attached. it is beneficial to move the car a little bit because the arm force is not sufficient. After this, the process is completed by reseating and securing the chain. after the chain is installed, the speed should not be exceeded 30 in the action to be done in the car. Warnings: do not attach a chain other than the type suitable for your tire sizes. Otherwise, it could cause damage. after driving 100 meters from the first point, you need to stop and re-tension the chain. If you drive over 50km/h with the snow chain installed, it may cause the chain to break. Do not allow the wheels to lock by sudden braking while on dry ground. Please try not to skid the wheels. Please be careful not to hit the edges of the pavement. Do not change the tire's air pressure while the chain is attached. If the chain breaks, stop the vehicle immediately and remove the chain. Continuing with a broken chain can cause serious damage to your vehicle. After disassembling your chains, wash and dry them, and keep them clean in their box. Package included:1 set (2 pcs)