NANOLEX Si3D Ceramic Protection, 30ml
-5%
(incl. VAT)
Shipped from: Romania
Trendyol's commitments
Easy and free return in 30 days.
Highlighted features:
NANOLEX Si3D Ceramic Protection, 30ml reviews
Product details
Product description
Nanolex si3d ceramic protection, 30ml, is a protection specially formulated to meet the highest customer demands and needs. Si3d molecules are precursors to ceramics and hybrid materials.
these molecules consist of organic compounds such as silicon, nitrogen, and hydrogen, as well as carbon.
these extremely strong polymers have low viscosity and are solvent-free. Nanolex si3d ceramic protection is a thermoplastic component used in addition to form a strong hydrophobic flexible layer in a 30ml composition.
this product provides weatherability and corrosion protection and protection against chemical solutions (active foams, etc.).
nanolex si3d ceramic protection, 30ml, can increase the total hardness of the varnish layer to 9h, adding a clear and shiny layer, and also deepens the surface color. The final thickness may vary depending on the number of product layers applied.
the number of layers applied together with the three-dimensional structure of the matrix si3d makes the lacquer layer resistant to chemicals and abrasion used in car washes. However, the benefits shared by nanolex si3d ceramic protection do not end with remarkable levels of protection and durability with 30ml.
more importantly, the treated surfaces become brighter (si3d color appearance and depth improvement), more durable (due to the hardness of the silicon-based matrix), and hydrophobic (water does not stay on the treated surface).
this last feature is not only for contact with water, but for faster cleaning of dirt (lotus effect).
Where the protective layer of classic protectors (wax, sealant) is lost over time or with the use of aggressive substances, the protection provided by nanolex si3d 30ml provides remarkable resistance and insensitivity to abrasion formed by frequent washing and the use of strong alkaline substances or acid detergents. Number of coats applied: 1 coat (minimum), 3 coats (adequate) durability: approximately 30,000 km drying time (curing): 90% in the first 24 hours, 10% in the first week after application ceramic protection application instructions: 1. You must wash the machine very well with the 2 chair method. Remove the bitumen or tar point located outside the machine using special solutions.3. Decontaminate the entire exterior of the car using clay for decontamination and lubricant.4. Dry and dry the outside.5. Degrease the outside using isopropyl alcohol.6. Start applying the ceramic protector in small sections (40 x 40 cm), let it sit for 10-20 seconds, and then wipe it off.
caution: read the manufacturer's instructions, use protective equipment (gloves, mask in case Suggestion: we recommend applying a paint stripper or polish before applying ceramic protection. If there are any scratches, they are on the lacquer and remain after ceramic protection is applied.
nanolex si3d ceramic protection, 30ml was developed, tested and produced in germany. Quantity: 30 ml
Additional info
- EU Responsible details are here.
- Please refer to the actual product packaging or the user manual for information regarding storage conditions.
- A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
- Sold and fulfilled by .
- Barcode No: 471951205835969356