OEM MK2B heated bed reviews
Product details

Product description
Product Description Heated bed __t1__ for 3d printers, used to heat the printing surface and improve the adhesion of the first layer. it is suitable for reprap 3d printers and other printers compatible with the mk2b format. The board is made of double-layer fr4 pcb and can be powered at __t2__ or __t3__, depending on the printer and power supply configuration used. The color of the heated bed can be red or black, depending on the supplier’s batch
the technical specifications remain the same. Technical specifications Model: mk2b
Product tip: heated bed for 3d printer
Overall dimensions: approx. 21.3 × 21.3 cm
Usable working surface: approx. 20 × 20 cm
Supply voltage: 12v / 24v
Required current: approx. 9.8a at 12v / 5a at 24v
Pcb material: fr4
Pcb thickness: 1.6 mm
Pcb double layer
Copper wire: 35 μm
Attention It requires a thermistor to measure the temperature. the thermistor is not included. Use a power source that is appropriately sized for the required current. the connections must be made correctly and securely, as the heated bed consumes a large amount of current. Check compatibility with the printer, control board, and firmware before installation. Package contents 1 × mk2b heated pad
Additional info
- EU Responsible details are here.
- Sold and fulfilled by .
- A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
- Barcode No: 6427854033116


