OEM MultiFunction Stripping Pliers reviews
Product details
Product description
Electrical cables require clean ends, and using a knife to strip them invariably cuts several wires in the conductor.
the oem multifunction wire strippers cut and strip wires, allowing you to make correct connections in electrical installations. It operates on cable thicknesses ranging from 0.8 to 2.6 mm and has a safety button for transport. It’s just a simple tool that changes your working speed.
how it works. Insert the cable into the appropriate slot, tighten the handles, and the tool will cut only the insulation, then pull it off the conductor. The copper wires remain intact, with their cross-section unchanged. An operation that used to require careful attention and both hands, now can be done with a single movement. The cable thickness range of 0.8 to 2.6 mm covers the most common cable sizes used in low-voltage installations and standard connections. Check the thickness of your cable beforehand to see if it falls within this range. Other tools are used for thicker cables. This mistake prevents it. A partial strip of tape used for insulation is resistant to tearing during installation, but it will eventually break after a few months, just when you don’t have time to look for a replacement. The reduced section heats up more quickly with the same current. A dezisolator that does not come into contact with the copper completely eliminates this source of the defect. The safety button keeps the blades closed when the tool is stored in its case or bag. A self-opening wrench fits into the bag and holds other tools and cables. Get into the habit of closing it every time you put away a tool.
maintenance. Remove the insulation scraps from the sheaths after a longer period of work, as they accumulate and prevent a complete seal. If the infusion tube is damaged, leave the partial insulation intact and you will need to reattach the end.
the cleanup takes a few seconds.
occasionally, apply a small amount of oil to the joint and wipe off any excess to prevent dust from accumulating. Do not use it to cut hard wire, screws, or steel cables, as the blade will break immediately. Keep it dry so that the bow and its joints don’t rust. In short.
in the package: cleste, unsealed.
Additional info
- EU Responsible details are here.
- A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
- Sold and fulfilled by .
- Barcode No: G326465
