OEM QGD submersible pump reviews
Product details
Product description
The qgd 3.0 submersible pump is the best solution for homes that do not have access to running water, as it operates outside the sewage system. Therefore, using a submersible pump will eliminate municipal water costs, as you can supply water from your own sources on your property, such as wells, springs, or ponds. A submersible pump for clean water can be used in situations where you want to supply a residence with potable water from a well of a certain depth. When choosing a pump, you need to consider the distance between the water source and your home, as well as the vertical and horizontal distances, in order to calculate the required flow rate and pressure. In our range, you will find pumps with or without a float, which is designed to ensure the pump’s reliability. The float is connected to a switch that detects the absence of water, thereby stopping the pump from operating. When the water level rises, the float pump will restart, thus avoiding unnecessary energy costs and preventing the pump from deteriorating. Compared to a standard submersible pump, the qg series pumps are screw pumps and offer the following advantages: a) reduced pump outer diameter (100 mm), which allows them to be installed in deep wells with a minimum diameter of 110 mm. The pump’s electricity consumption is proportional to the head (height) it lifts the fluid. B) high lifting capacity and high efficiency: thanks to their hydraulic design, the pumps in the qg series are more efficient than a standard submersible pump and, consequently, more economical in terms of energy consumption. C) submersible screw pumps have the advantage of being used not only for transporting water over long distances, for irrigation or spraying, but also for supplying water from wells. If you attach an automatic start/stop system to the pump that operates based on pressure, it can be used in an automated mode. A submersible screw pump consists of three main components: the electric motor, the screw pump, and the sealing elements. The electric motor is a single-phase asynchronous electric motor and is located at the bottom of the pump. The electric motor is vertical and is hermetically sealed. When the pump is submerged in water, the motor stator, through the housing, acts as a radiator, reducing the temperature inside the pump.
The pump impeller is mounted on the motor shaft, at the top, and when the motor rotates, regardless of the speed, the rotor (impeller), which is connected to the motor shaft and moves simultaneously with the stator, will perform an eccentric rotational and revolutive movement around the motor shaft. Power: 1100 w, motor voltage: 220v, 50hz, suction depth: 120m, discharge diameter: 1. "
Debit 3 mc3/hour corp inox power cable length 10m metal mounting system weight 9 kg
Additional info
- EU Responsible details are here.
- A maximum of 10 units of this product can be ordered. Trendyol reserves the right to cancel orders over 10 units.
- Sold and fulfilled by .
- Barcode No: 6427679060335
