Generic Brand Coupling Internal Thread Female Elbow 25x1/2

Note: couplings will be sent in blue or green series depending on stock availability.

Usage information

+  pipe connection adapters  should be kept away from hard and sharp objects during storage and installation.  if the installation is to be laid under the ground,  it should be covered with sand to protect it from hard and sharp objects.  definitely damaged adapters should not be used.

+   in order to get the  maximum efficiency from pipe connection adapters  , tees and elbows should be mounted to the pipe at 90° and other adapters at 180°.  connections that create different angles will cause stress on the adapter and will reduce the life of the installation.+  teflon tape should be used on threaded connections.  teflon tape should be wrapped on the adapter to the extent that it prevents water leakage and in the direction of tightening.  using too little of the teflon tape will cause the adapter to leak water, and using too much will create an additional stress on the adapter.  this situation may cause the adapter to break while it is more  during installation.

Features

+   made of high quality polypropylene raw material, resistant to shock.

Prevents problems that may arise from measurement differences or ovality in pipes up to ± 0.5 mm, thanks to its conical tightening feature.

+   it does not allow algae formation and bacteria growth as it is uv opaque.

+  oringi is produced in rubber naturel and  high sealing .

+   the inner surfaces are homogenous and non-porous .

+  it does not contain any  foreign substances that could modify the smell and taste of the water.

+  excessive tightening of the nut during assembly causes additional tension on the adapter. the product subjected to this additional tension cannot be expected to meet the guaranteed pressure values. therefore, it should not be forgotten that the product is made of plastic and should only be tightened with the force required to ensure the seal.