POELSAN Screw Socket Pendant with Metal Ring 25X1/2"

Areas of use: city network drinking water - landscape sector agricultural irrigation - greenhouses. during storage and assembly of socket pendants, they should be kept away from hard and sharp objects. If the installation is laid under the ground, it must be covered with sand to protect it from hard and sharp objects. Damaged products should definitely not be used. The orings in the socket pendants should be placed neatly in their sockets and care should be taken not to dislodge them during assembly. The teflon tape should be wrapped around the adapters to be used with the socket pendant, enough to provide sealing, and in the same direction as the tightening. The pipe drilling process after the installation of socket pendants should be carried out with a suitable drill bit so as not to touch the threads. If the pipe is larger than its standard value, the bottom and top covers will not touch each other during the assembly of the socket necklace. In this case

the bolts of the socket pendants do not need to be tightened until the lower and upper covers touch each other. When assembling socket pendants, bolts and nuts should be tightened symmetrically. It is produced from high-quality polypropylene raw material that is resistant to impacts. It is designed to prevent leaks that may arise from differences in measurements in pipes. The oring is made of rubber and provides sealing under high pressure. Thanks to the corrosion-resistant metal ring used in our products, it can be safely used in systems that do not exceed 50 °c. It does not contain harmful compounds that can change the smell and taste of water. It is suitable for use in drinking water. Metal ring, bolts, nuts and washers are diversified in stainless steel and galvanized. The nuts are placed in their slots on the bottom cover, allowing for quick and easy assembly. Thread sizes conform to iso 7-1 standard. Conforms to iso 13460-1 standard.