Quick Varf Letcon TSS02-SK-01

Product description

There are clear steps to separate a component with many legs, and the first is to choose the tip that can hold the entire length of the line.

tss02 series wide blade version specified by the manufacturer for the quick ts1200a intelligent lead-free soldering station, for the fast tss02-sk-01 and

e scula for bridges, tresa and areas that require a lot of heat delivered quickly.

you check your handlebar series before order.

a clean separation steps begins with a generous flow during the pine to have a transfer bridge and a fresh flow in the blade.

pass the blade back to back, hold the melted cosmetic holder, and lift the component with the collet without pulling it.

if you feel resistance, stop and add more flow.

after the piece comes off, clean the pads with tresa and the same blade.

a hard pass leaves the same direction, flat area.

you check them under a microscope so they are not on the edges. Why is width important? with a wide blade, you can heat multiple pine trees at once, reducing the time the plate remains below the temperature. A fine tip allows you to repeatedly and persistently target the same area, which increases the risk of pad (peripheral artery disease).

the difference can be seen in the number of repairs coming out of the first. Lead-free alloys require more energy to flow, so width is also a factor here.

you do not need to increase the temperature to values that would burn the protective mask.

convenient form just unravels the things that the setting hides.

after the loaded work the cleaning lama comes out of the protrusions covered with a burnt flow, which becomes crust and cuts off the heat transfer.

wipe how hot it is on the brass wire and leave it broken.

the cold residue comes off much harder.

after the shell is installed, you quickly pass the hot end through the regeneration pulp and immediately sew it.

never force the edge with a battery and try to fix it.

the notch or groove in the blade means changing tip.

brief package contents: letcon tip

Additional info

• EU Responsible details are here.
• A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
• Sold and fulfilled by
  GSM Boutique
  .
• Barcode No: 6974252820874