Quick Varf Letcon TSS11-SK

Product description

When you need to clean a series of pads with a tresa or remove a multi-foot connector, the width of the active area determines how long the job takes. The tss11-sk rapid is a wide-blade form from the tss11 series, characterized by the manufacturer as having a 3mm blade for excellent control in precision work.

serves you to work with the disassembly and fludor bridge.

check your handlebar stem before ordering due to different fitment.

tresa and pads clean a wide blade heats tresa across the width and sucks the cosmetics in one pass.

you pass three times with a fine tip and leave residue that prevents the new piece from

apply flow, put on tresa, touch with a knife and pull in the same direction.

the right result means flat, clean pads, fabric ball left on the edge. Before installing the new part, you'll want to inspect it under a microscope. even a single speck of dust left behind can throw off the alignment.

a clean pad cuts down on the rest of the job.

the removal method's stitch points work when you have a blade that can grab the fabric along a pine row.

load the edge with fludor, apply the flow and protect the bridge when removing the component.

can't be done without the width, no matter how well the station is set. After disassembly, the area is cleaned with the same knife and tresa.

the flow remains mandatory at each step, otherwise the cozitosis is collected in balls.

you work in short strokes so you don't keep the heat in the plaque any longer than necessary.

maintenance after dirty jobs removal with too much flow loads the tip with residue that carbonizes and inhibits heat transfer.

immediately after the operation, wipe on the brass wire and leave it to rust.

the residue left to cool in the blade becomes a hard shell that is difficult to remove.

when scale is formed, the re-generation paste solves it with a short pass of hot end, and breaks off immediately.

shaving with a battery removes the coating and shortens the tip definitively.

if the blade is stuck or has gouges, you replace it.

brief package contents: letcon tip

Additional info

• EU Responsible details are here.
• A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
• Sold and fulfilled by
  GSM Boutique
  .
• Barcode No: 6974252828818