Relife Screwdriver Bit, Torx Plus (4IP)

Product description

The 4ip torx plus screws are among the smallest you’ll find when disassembling a phone, and a rounded tip makes them easy to turn from the very first rotation. The bitul relife torx plus (4ip) is specifically designed for this size and fits perfectly into the socket without any play. You assemble it using the screwdriver you already have and continue working without improvising. For a technician who disassembles equipment daily, a correct tip can make the difference between ten minutes and an hour wasted. Where do you install the 4ip profile? Torx plus is identified by its wider lobes and the fact that it does not accept a standard torx bit without some play. The 4ip marking appears on small internal screws, on the mounting brackets, on metal covers, and on the mounts under the display in many devices. If you’ve tried using a small phillips head screwdriver on this type of screw and it just wouldn’t turn, then this profile is the solution. The bit only works in the socket it is designed for

do not force it into a standard torx socket of the same nominal size. The difference in shape is small at the eyes, but it’s enough to make it eat the corners of the nest. If you have any doubts, compare the tip with the screw in good lighting before pressing it.

when pressing, make sure not to round off the head of the screw.

place the screwdriver on the screw head, ensuring it is perfectly aligned, and press down while turning it slowly. Phone buttons give way under constant pressure, not speed, and it’s the suction that wears down the surface. If you feel like you’re going to lose your balance, stop and check if you have the right size before you continue. Screws secured with adhesive are not loosened by cold temperatures. Gently heat the area and try again

otherwise, you’ll break the head and end up with a screw that won’t thread into the nut. A 4ip wrench is inherently thin, so don’t use it as a lever or twist it sideways. What do you check upon receiving it, and how do you store it?

then, turn the pieces over under the light and check to see if the edges are clean, without burrs or any flattened corners. The actual test is done on a good screw: it must go in all the way and not get stuck in the wood. Make sure the bit is properly seated in the handle and doesn’t wobble. After working with it, wipe the tip to remove any flux residue and metal dust, and then put it back in its holder in a dry place. A bit of metal gets chipped off the edge of the tool and ends up getting stuck just when you need it. When you see that the lugs have rounded off, replace it

there’s no point in trying to tighten the screws with it. In short.

in the package: bit surubelnita.

tip type.

torx plus: 4ip.

Additional info

• EU Responsible details are here.
• A maximum of 10 units of this product can be ordered. Trendyol reserves the right to cancel orders over 10 units.
• Sold and fulfilled by
  GSM Boutique
  .
• Barcode No: G382636