RF4 Instrument BGA RF-KH13 reviews
Product details
Product description
When removing adhesive residue from a motherboard, don’t use whatever you have on hand
instead, use a blade specifically designed for this purpose. The bga rf4 rf-kh13 tool is designed for cleaning circuit boards, removing adhesive, and detaching components. The aluminum alloy body provides a firm grip, as described by the supplier. You should request the kh13 code exactly as it is, because rf4 has several tools with similar names. What operations do you use it for? It burns when you need to clean up black adhesive residue after removing a chip or connector. It is also used to detach shields and components that are attached to the board, using controlled movements. You’re working under a microscope so you can see exactly where the blade goes in. It is also useful when preparing the area before applying a new adhesive, when you need a clean surface. The adhesive on the board is not holding the new component properly. Proper pruning is half the battle when it comes to successful gardening.
how to use it correctly. Never force the blade perpendicular to the surface
instead, work at a small angle and with short strokes. The board must be secured to a stand
otherwise, it will slip and you will end up in the tracks. The slight heating of the adhesive makes it much easier to remove than if it were to be removed at room temperature.
support it on a table or stand so you have fine control. Don’t press harder if it doesn’t work
instead, adjust the angle or warm up the area. Here, the rabdara saves you from a dead end.
tool maintenance.
wipe the blade after each use, as adhesive residue hardens and causes it to slip. Isopropyl alcohol and a cloth are all you need. Don’t hold the tool freely between the screwdrivers, as the tip will get chipped. Check the condition of the tip regularly and do not attempt to sharpen it yourself unless you know exactly what you are doing. The deformed clay has an unpredictable path on the plate. Keep it in its case or on its stand, with the tip protected.
Additional info
- EU Responsible details are here.
- A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
- Sold and fulfilled by .
- Barcode No: G384679
