RF4 Microscop RF-7050PRO-FO19 reviews
Product details
Product description
The arm and stand make up half of the components of a service microscope, and the rf-7050pro-fo19 even bears the fo19 code, which is the model number for the assembly. Don’t put it in the same container as the rf-7050tvp or the sets that come with the monitor, because the mounting method is different.
you attach it when you need to position the optical head over a fixed plate and then pull it to one side. This device is designed for those who work with motherboards on a daily basis. It allows you to move freely. When you have a large plate or a phone lying open on the table, a rotating and retractable head gives you space for your hands. Now, instead of moving the slide towards the microscope, move the microscope towards the slide, so you don’t disturb the cables that are already connected. When taking measurements with a multimeter, the available space is more important than anything else. With two-step processes, such as gluing followed by cleaning, you can set the head aside without losing the position of the panel. You go back and start from exactly where you left off. The time saved each day adds up considerably.
adjustment and ergonomics. The height and angle are set once for your height and for your chair, and they don’t change for each task. If you use a banknote in a game of chance, note down the positions so you can quickly recreate them.
a poorly designed workbench throws you off your rhythm after just two hours.
the arm requires a table with a solid surface and a firm attachment to the edge or the base plate of the stand.
check the grip before letting your head rest freely on the board. A glue stick is about to reach the components you just glued together.
maintaining the stand. The joints are checked periodically, as the problem develops gradually, not all at once. A child who is left to play on their own should be supervised, but not forced to do so with added burdens. Do not lubricate the joints with cooking oil or sprays that attract tin dust.
clear the smoke and residue from the flow, which accumulate and clog the mechanism. Don’t hang cables, pots, or the hot air gun from your arm. When you disassemble the tripod, first remove the optical head and only then the tripod itself.
Additional info
- EU Responsible details are here.
- A maximum of 15 units of this product can be ordered. Trendyol reserves the right to cancel orders over 15 units.
- Sold and fulfilled by .
- Barcode No: G384707
