RF4 Microscop RF-7050TVP

Product description

On the bench, it's used as an rf-7050tvp work microscope, meaning you're hands-free with letcon, no more staring at a five-second plate, and you're good to go.

the tvp name is specific to this configuration and does not get mixed up with the tvd2 variants or the monitor delivered ones. Please check the code on the box before ordering accessories. It is a workshop tool that is mounted on the table and has adjustable height.

you hold the work at the table, looking for a cat between the pastilles, checking whether a condenser has lifted off a plate in a drop, or watching an intermittent track under the lake. When replacing a charging connector, check if you've left any wiring in adjacent areas.

after each intervention, you make a control pass to the entire working area.

also useful at reception when you want to document the condition of a plate before you start. A plate with moisture marks or adhesive residue from another source will be immediately visible under magnification.

thus avoiding blame for an old problem. The settings that make a difference first adjust the pupil distance and focus only, otherwise you will strain your eyes in vain. If you wear glasses, adjust the diopter on the ocular so you can work without them. A correct posture is maintained all day long, while a poorly adjusted one will knock you out of work in two hours. the column height is typically fixed based on the thickness of the plate support you're using.

if you change the support, restore the adjustment, you don't push the plate up what you have in your hand.

the right anchoring gives you the same focus on every job. What often ruins a workshop microscope is the fumes from the soldering station and hot air gun, which leave a sticky film on the lenses. The second enemy is the lime jump that sticks to the windows and is difficult to remove.

a cheap protection screen over the lens saves you from both.

do not leave tools on the microscope arm and hang column cables.

the extra weight makes it shift by throwing off the mechanism.

when you move the device, hold it at the base, not the head.

Additional info

• EU Responsible details are here.
• A maximum of 15 units of this product can be ordered. Trendyol reserves the right to cancel orders over 15 units.
• Sold and fulfilled by
  GSM Boutique
  .
• Barcode No: 6973331241098