SIRAY 3/4 Galvanized Comet Elbow

Product description

Standard and identification: for production and use standard en 10242:1994 identification: in accordance with the material chosen for production and thread type, td fittings are defined as “a” class fittings, which point to the following. 1 - 1- high quality b 350 -10 are made of black tempered cast iron 2 - 2- teeth are opened according to iso 7/1

that is, parallel internal tooth (rp) and conical external tooth (r) application: all td fittings up to 25 bar, 120 ° 120 at temperature up to c or below 20 bar ° C – 300 ° It is suitable for the transmission of gas, steam and compressed air in the temperature range c. Dimensions: all td fittings are manufactured according to en 10242 standard specifications. Control: all td fittings are checked for compliance with the en 10242 standard specifications. Marking: all td fittings are marked with the td brand whenever possible and/or with nominal size designations. Galvanized coating: td fittings can be supplied as black or galvanized coated, as requested by the customer. According to the en 10242 standard, the weight of the zinc coating should not be less than 500 gr/m², corresponding to a medium coating layer thickness of 70 µm. Both types of surfaces are covered with anti-corrosion varnish. Td fittingslerini aromatic hydrocarbon on its surface is not. Leak test: with the implementation of en 10424 standard, each td fitting is min. It is subjected to testing under a minimum hydrostatic pressure of 20 bar, which is equal to 5 bar of pneumatic pressure.

Additional info

• EU Responsible details are here.
• A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
• Made in Türkiye
• Sold and fulfilled by
  FİBA TEKNİK
  .
• Barcode No: 1277547896065
• Origin: TR