Sticky Shales Rust Remover Solution

Product description

It is a solution for rust removal.

It contains active phosphating substances, corrosion inhibitors, surfactants, solvents, and special additives.

It is used for: removing rust and scale from metal surfaces, degreg and pre-treating these surfaces by phosphating for painting.

Application method: Apply with a brush or by spraying on the metal surface (area) attacked by rust and which is desired to be treated, or make a bath where the solution is placed and the parts to be treated are introduced.

For lightly rusted surfaces: Apply a continuous layer of the product.

After one hour, moisten with water to facilitate the penetration of the solution into the rust layer and to ensure the necessary duration and humidity for complete conversion.

For heavily rusted surfaces: Apply a first more diluted layer (2 parts Deruginol + 1 part water).

After 3-4 hours, apply the second layer of undiluted Deruginol, and after 1-2 hours, moisten the surface with water.

If the rust layer was too thick, a third layer of Deruginol can be applied under the same conditions as the second layer.

Conversion is considered complete when the treated surface becomes uniform, black-bluish in color (after 12-24 hours).

Additional info

• EU Responsible details are here.
• Please refer to the actual product packaging or the user manual for information regarding storage conditions.
• A maximum of 10 units of this product can be ordered. Trendyol reserves the right to cancel orders over 10 units.
• Sold and fulfilled by
  Noblia
  .
• Barcode No: trendy957