Sunlu Filament dryer for AMS Bambu Lab

Product description

Sunlu Filament Dryer for Bambu Lab AMS The SUNLU AMS Heater is an intelligent filament dryer designed specifically as an upgrade for the top cover of the Bambu Lab AMS system (Generation 1). It allows you to dry the filament and print simultaneously, eliminating the need for pre-processing the material. Thanks to rapid heating to 70 °C in just 20 minutes, an advanced air circulation system, and intelligent humidity monitoring, the device significantly improves print quality. Its compact design, full compatibility with AMS, and support for up to 16 colors make this solution ideal for demanding 3D printing users. Print and dry simultaneously — save time and achieve better results Forget about separate filament drying before printing. Thanks to integration with AMS, you can dry the material exactly when you use it. This means stable operating conditions throughout the entire printing process, fewer errors, and higher-quality models without extra steps. Precise air circulation — uniform drying without risk of overheating A unique system of air ducts directs heat exactly where it is needed — around the filament. This ensures efficient and uniform drying while keeping AMS components, such as the feed motor, safe. You minimize the risk of material warping and component overheating. Rapid heating up to 70 °C — ready in a few minutes An efficient heating system with PTC technology allows you to reach a temperature of 70 °C in approximately 20 minutes. This is faster than traditional solutions, resulting in higher operational efficiency and shorter waiting times before starting a print. Intelligent humidity control — filament always in perfect condition The rH mode automatically monitors humidity levels and reacts in real time. When humidity exceeds the set threshold (50% by default), the device starts drying, and when it drops to around 20%, it switches to standby mode. You can also adjust the range (25–50%) to suit your needs, ensuring optimal conditions for every material. Easy installation — quick upgrade in 2 minutes Installing the device is extremely simple and requires no specialized tools or expertise. Just unscrew, mount, and tighten — the entire process takes about 2 minutes. It's a fast way to improve your AMS performance. More possibilities, less space — ideal for multicolor printing After installing the AMS Heater, you can use configurations of up to 16 colors without increasing the required space. This is a huge advantage for those working on complex projects and multi-material printing. Included in the set: SUNLU AMS Heater module

Mounting hinges

Mounting screws

Allen key

Power cable

User manual

Manufacturer Sunlu Model Heater for Bambu Lab AMS Product dimensions 363 × 278 × 131 mm Package dimensions 415 × 316 × 190 mm Net weight 1.7 kg Temperature range 35–70 °C Heating time to 70 °C approx. 20 minutes Time setting range 0–99 h Humidity display range 10–90% RH Maximum power 390 W Rated power 220 W Standby power consumption 0.6 W Power supply AC 110 V / 60 Hz or AC 220 V / 50 Hz Maximum current 2.2 A (230 V) / 4.15 A (120 V) Heating system PTC + dual air circulation Humidity control Automatic (starts above 50%, stops below 20%, adjustable between 25–50%) Compatibility Bambu Lab AMS Generation 1 Function Drying during printing

Additional info

• EU Responsible details are here.
• Please refer to the actual product packaging or the user manual for information regarding storage conditions.
• A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
• Sold and fulfilled by
  EBAZAR MASSMARKET
  .
• Barcode No: 6933582322243