SUNSHINE Instrument BGA SS-101A Upgrade reviews
Product details
Product description
The small components on the motherboard are not removed with a screwdriver or a regular pair of tweezers, but with a thin blade that fits underneath them. The bga sunshine ss-101a upgrade tool is designed for this type of disassembly and for performing precise work on bga chips, such as processors or baseband chips. It is used when you need a narrow tip that can pass under a component without hitting the adjacent parts. It’s a tool for micro-soldering, not for disassembling casings.
the operations for which you are removing it. You most often use it when lifting a component that has been heated with hot air, when the alloy is soft and you need to push it from the side.
slide it under the edge and detach it carefully, without pulling it off. Smudging tears the images off the plate, turning a single work into two. It is also used for cleaning the area after dismantling, when there are remnants of alloy or hardened resin left behind.
carefully smooth it out at a slight angle, while the plate is still slightly warm. Don’t press it to make it go faster, because it will drift off course.
working technique on the board.
support your hands and work with the tips of your fingers, not with your arms.
such a delicate instrument amplifies every tremor and cuts precisely where it shouldn’t. With the plate attached to the support, you have complete control over its movement. Always check that the alloy has melted before attempting to lift it. If the component doesn’t yield, apply more heat, but don’t apply more force. It breaks under pressure, almost never due to a lack of patience.
top, wear, and storage. The thin wires are bent and cut, and one of the bent wires ends up getting lost among the components. Check them before each final piece of work and set them aside when they are no longer straight. A broken scula causes more damage than its absence.
the pastries are packaged in boxes or containers, and are never mixed with other metals. Wipe immediately after use, while the residue is still soft.
moisture and deposits lead to rust, and rust permanently damages the tip. In short.
in the package: bga tool / blade.
Additional info
- EU Responsible details are here.
- A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
- Sold and fulfilled by .
- Barcode No: 6941590210452
