SUNSHINE Statie separare Display Touchscreen S-918K reviews
Product details
Product description
The powerful suction and the fine-tuning thermostat are the two main reasons why the s-918k is a popular choice among technicians. The supplier states that the product dimensions are 283 x 170 mm and that it is designed to help detach the screen from the phone or tablet body.
it is used in display replacements, where the panel must remain stationary.
the vacuum that holds the panel in place. The vacuum does half the work in separating the components, as it holds the panel in place while you pull the wire. You start vacuuming with one hand and pull with the other, and the panel twists at exactly the wrong moment. With the plate attached, the force is applied to the wire, not to hold the screen in place. Make sure there are no protruding edges between the panel and the surface, as this will compromise the seal. If you hear a hissing sound, it means there’s an air leak, and the suction isn’t working at its full capacity. It covers the unused holes when you place a small panel on a large tray.
the working area and what can fit inside it. The source indicates product dimensions of 283 x 170 mm, so we are talking about a compact workbench. It needs a fixed table corner, close to the outlet and away from traffic. Don’t keep it on the shelf where you take it from every time you place an order.
measure the space before you order it, especially if you already have a lamp and a space heater on the same table. Hot cables should not run across the platform. A well-thought-out arrangement will shorten the duration of each subsequent task.
grease that ruins a good lcd. The most common mistake is to raise the temperature to finish things faster. The lcd screen gets scratched, and the polarizer creates ripples, and the defect only appears after you’ve glued the new screen in place. Go for moderate heat and gradual temperature changes, not sudden temperature shocks. The second mistake is using a thread that is too thick or pulling it at an angle that goes into the lower flex. A broken flex cable means a lost panel, as it cannot be repaired. I remember where the flex cable goes in the model in front of you, and it bypasses that area. In short.
in the package: stand separate display touchscreen.
Additional info
- EU Responsible details are here.
- A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
- Sold and fulfilled by .
- Barcode No: 6941590210612
