SUNSHINE Varf Letcon SS-210-SK reviews
Product details
Product description
The slippery spots between the pine trees and the separation of the tresa require a wide blade to reach more pine trees at the same time.
sunshine ss-210-sk and 210 series sk tip with approximately 0.2 mm soldering surface, according to supplier data.
it heats up in about a second and sticks twice so it stays a bit on the plate.
check that your handle takes 210 bits before ordering.
it gives the yield of a sk blade.
forma sk is made for multi cosmetic and large contact surfaces, not for single pin. You use it for removing tresa and fludor from multi-pin connectors and screens.
the blade pulls the furnace from behind and leaves the forests clean with one movement.
when you restore the wrong bridge, you put the flow, you pass the blade through the pine string, and the rod is self-collected.
no flux, the blade just pushes and makes balls in the plate. You're working with tresa in the same way: you apply tresa, press the blade onto it, and wait for it to absorb.
the product data achieves heating in about one second and bonding in two seconds, which means that you can operate quickly.
the short contact is the one who saves the plate, not the low temperature given to a slow station.
you prepare with flow and cosmetics to avoid improvising on top of the pad.
if the glue does not flow within a few seconds, stop and check the flow and cleanliness of the pad.
the persistence burns the mask and lifts the small forests.
take a second break and return better than holding the knife in place.
series, assembly and maintenance.
210 tips do not go into the shanks of another series, so you compare the tail of the old tip before ordering.
you push the element all the way in and tighten the ring so it won't move.
a contact plate between the tip and the element is cut off from the actual power of the station.
the wide blade will get dark quickly if you don't leave it in the jar at high heat.
after each job, it is wiped and loaded again with fludor. When the blade's surface becomes dull and it starts to reject cosmetics, it's time to transfer and get a new one.
in short. Package contents: letcon tip.
Additional info
- EU Responsible details are here.
- A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
- Sold and fulfilled by .
- Barcode No: 6941590211138
