Sunshine Varf Letcon SS-C210-K

Product description

The screen of a phone plate is removed in a warm manner, and there is no sharp end luck there. The sunshine ss-c210-k comes with a woven blade, making it ideal for tables and connectors with numerous studs.

it is attached to c210 series handles and does not fit other series.

keep it next to the fine tips to switch between them after work.

why would a blade take more heat.

larger contact surface means faster transfer, so the adhesives done in a few seconds.

you make table points with it, you sew thread and you cut big dots.

a tapered tip in the same place stops and cools before the work is done.

the woven edge is also helpful for cleaning a of pine trees.

put the flow on, place it on the wire and press the knife on it.

the bucket goes right up and the woods stay clean.

two forms on the table, not one.

workers in a single form waste time in half of the work.

tii long for power and a cone for accuracy and change in a few seconds.

change is rapid in modern handles, so you have no excuse. You can reduce the temperature according to the setting used with the fine tip when you pass over the blade.

heat comes from the contacts not the degrees on the gauge.

the plate and end trim just win. Daily care.

as soon as the blade is heated before stopping the station and reload.

don't leave it hot and empty between runs, or the coating will disappear. Clean with brass wire or a damp sponge. If the blade's surface turns black and loses its fluidity, it indicates poor heat transfer and subpar adhesive removal.

replace the tip and continue without trying to recover with battery.

a consumable is replaced, not repaired.

in short. Package contents: letcon tip.

Additional info

• EU Responsible details are here.
• A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
• Sold and fulfilled by
  GSM Boutique
  .
• Barcode No: 6941590207582