Uğur Leaf Fountain Rolling Machine Leaf Rolling Device Fountain Rolling Machine Practical Rolling Machine

Leaf stuffing wrapping machine product features it is no longer difficult to surprise both your household and your guests with your leaf wraps! With the practical stuffed leaf wrapper machine, the stuffed wraps you wrap will no longer open and will be the same size. This wonderful product has 3 levels, each level wraps a different size. Turn the adjustment knob to the desired position according to the paint you want to wrap. It wraps thick at 1, medium at 2, thin at 3 on the setting knob. Lube the belt by dripping a few drops of oil on it, spread the oil on the belt. Put the machine on a level floor with the low side facing you. Place the leaf on the sink from the stem part, centered on the bottom of the machine. Make sure that the leaf fits well to the bottom of the machine with your fingers and does not cover the overflowing parts from the sides, and that it reaches the side walls of the machine. Put the inner material according to the thickness of the stuffing to be made on the bottom of the leaf. Use 1.5 for thick wrapping, 1 for medium wrapping, and ½ spoon for thin wrapping. You can find this amount by experimentation. Finally, push the handle forward. The wraps will fall out of the end of the machine ready. Without putting the new leaf, press lightly with your finger on the bottom of the tape to make it tight. The product is cleaned with a soapy cloth and rinsed with water. The product should be installed without lifting. It should not be washed in the dishwasher. Product dimensions............... 28 cm length. 12 cm height. 8cm width. Color: it will be sent as an assortment according to stock availability. The product is a new original product and will be sent by contracted cargo.