Vitex Durovit solvent-based acrylic primer, transparent, 5L

Product description

Features: The transparent acrylic substrate protector is solvent-based, with high water resistance and strong vapor permeability.

Provides strong adhesion and high penetration power on porous surfaces such as plaster, concrete, brick, and drywall.

Ideal for stabilizing surfaces coated with low-quality paints or dispersions.

Offers waterproof surfaces while still allowing vapor permeability.

It allows surfaces to breathe.

*Read the technical data sheet or product label carefully before use! __t2__ the surfaces must be smooth,clean and dry,with no grease or dust or flaky paint. Application: Mix well before use.

Applies with a layer of trafaret, brush or spray.

Pereи›i diluaи›i pânдѓ ila 100% and plafon pânдѓ ila 30% for и™i.

Do not apply at a temperature below 5 ° c, above 35 ° c and/or relative humidity above 80%.

Emulsion or acrylic paints can be applied 1 hour after drying to the touch, and 4-6 hours after full cure.

The drying time depends on the weather conditions (humidity and temperature).

Rollers, brushes, floor stains, etc. should be cleaned immediately after use.

Additional info

• EU Responsible details are here.
• Please refer to the actual product packaging or the user manual for information regarding storage conditions.
• A maximum of 15 units of this product can be ordered. Trendyol reserves the right to cancel orders over 15 units.
• Sold and fulfilled by
  Vexio
  .
• Barcode No: 4719512059040284
• Origin: PS