Dewalt DCK2080P2T 2-tool pack

Product description

General presentation The DCK2080P2T 2-piece set is part of the Dewalt cordless power tool range.

It consists of a DCD796 impact drill and driver and a DCG405 grinder, delivered in a TSTAK IV box.

Other features of the DeWalt DCD796P2-QW cordless drill/driver • Compact impact drill and screwdriver with new 18V and 5.0 Ah Li-Ion XR batteries

• Compact design and low weight to allow access in confined spaces

• 2 speeds and all-metal transmission for increased uptime and longer life

• Torque can be adjusted in 15 ways for screwdriving in a variety of materials

• Intelligent switch design allows total control during use

• LED for increased visibility

• Ergonomic handle, covered with rubberized material to ensure maximum user comfort

• Sliding Li-Ion batteries allow for quick battery changes

• The steel belt clip and the strongly magnetized bit holder are the ideal storage and transport solution

• The multi-charger can be used for 18V, 14.4V and 10.8V batteries from the XR Li-Ion slide-in battery range.

Technical details • Battery type: Li-Ion XR

• Battery voltage: 18 V

• Battery capacity: 5.0 Ah

• Maximum torque (under load): 70 Nm

• Maximum torque (no load): 27 Nm

• Idle speed: 0-550 / 2000 rpm

• Strokes per minute: 0-9350 / 34000 bpm

• Chuck opening: 1.5 - 13 mm

• Maximum drilling diameter in wood: 40 mm

• Maximum drilling diameter in metal: 13 mm

• Maximum drilling diameter in masonry: 13 mm

• Sound intensity: 89 dB(A)

• Acoustic intensity: 100 dB(A)

• Hand/arm vibration - hammer drilling in concrete: 23 m/s²

• Length: 190 mm

• Height: 203 mm

• Width: 67 mm

• Weight: 1.8 kg.

Other features of the Dewalt DCG405 grinder • 18V brushless motor

• Electronic brake that stops the disc quickly after releasing the trigger

• • Electronic clutch that reduces kickback in the event of a blockage in the material

• Metal mesh guards that prevent dust from entering the engine

• Rubberized outer molding for better grip and increased comfort

• Side handle with two positions

• 18V XR Li-Ion batteries ensure maximum power and performance.

Technical details • Battery type: Li-Ion XR

• Battery voltage: 18 V

• Battery capacity: 5.0 Ah

• Idle speed: 9,000 rpm

• Maximum disc diameter: 125 mm

• Clamping system: M14

• Hand/arm vibration - grinding: 4.4 m/s²

• Sound intensity: 85 dB(A)

• Acoustic intensity: 96 dB(A)

• Length: 310 mm

• Weight: 1.75 kg.

Content • DCD796 percussion drilling and boring machine

• Angle Grinder DCG405

• 2 pieces of 18 v 5.0 Ah batteries

• Charger

• TSYAK IV transport case.

Additional info

• EU Responsible details are here.
• Please refer to the actual product packaging or the user manual for information regarding storage conditions.
• A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
• Sold and fulfilled by
  Vexio
  .
• Barcode No: 4719512059057420