Color:1 RC and 1 Receiver

GERMA 433Mhz Universal Wireless Remote Control Switch DC 12V 2CH RF Relay Receiver Module + 2 CH RF 433 Mhz Remote Transmitter

Specifications Of The Transmitter:

Model Number: KT05-4

Operating Frequency: 433MHz

Power by 3V Coin Cell Button Battery (Battery included )

Material: PVC

Button: 2 Buttons

Size: 59mm x 28mm x 8mm

Operating Voltage: 3V

Operating Current: 12mA

Transmitting Power: 10mw

Modulation Mode: ASK (AM)

Encoding Type: Learning

Transfers Distance: 20-50 m

Specifications Of The Receiver:

Model Number : KR1202-4

Product Type: Dual Channel Remote Control Switch.

Encoding Type: Intelligent Learning Code.

RF Working Mode: Superheterodyne Reception.

Modulation Mode:ASK.

Working Mode: Momentary and Toggle.

Working Voltage: DC 12V.

Quiescent Current:5mA.

RF Frequency: 433MHz.

Signal Channel Working Current: ≤40mA/Dual Channel Working Current:(Self-locking Mode) ≤80 mA.

Quiescent Current:5mA.

Output Current: ≤10A.

Output Mode: Dry Contact/Voltage Output.

Receiving Sensitivity: >104dbm.

Remote Control Range: >50m (Free Space).

Wired Connection Way: Fixed Wiring Pillar.

Color: Green (PCB Board), White (Outside Shell).

Circuit Board Size: 7.3 * 5.3 * 2.0cm

Operation instructions:

Deleting Existing Remote Controls Data:

Pressing 8 times the learning key button on the receiver board, the LED indicator on receiver board will turn off then turn on; It means that the existing remote controls are deleted successfully.

Momentary Mode:

1)Press once button (the learning key on the receiver board),

LED Indicator(on the receiver board) turns off. LED is off now, before it is bright.

2)Press"A"button, then press "B"button, LED Indicator(on the receiver board) turn on, it means that successfully setting "Momentary Mode".

Toggle Mode:

1)Pressing 2 times button (the learning key on the receiver board),

LED Indicator(on the receiver board) turn off. LED is off now, before it is bright.

2)Press "A" Button, then press "B" Button, LED Indicator (on the receiver board) turn on, it means successfully setting "Toggle Mode".

Toggle Mode 2:

1)Pressing 3 times button (the learning key on the receiver board),

LED Indicator(on the receiver board) turn off. LED is off now, before it is bright.

2)Press "A" Button, then press "B" Button, LED(on the receiver board) turn on, it means successfully setting"Toggle mode 2".

NOTES:

1. Please do not charged operation, you should shut off the power, and operation after testing and correct electricity.

2. Please promptly change battery when remote control voltage is insufficient(when the battery voltage is insufficient, generally get close transmitting).

3. Please pay attention to avoid metal mask, large equipment, strong interference electromagnetic filed when using wireless RF products, and avoid too short distance between the remote control and receiver board.

4. Please avoid abnormal using of the product. Abnormal using will reduce product performance and life, when seriously it may damage the products and even make danger for your safe.

Notice:

The package Included different products because you choose a Different options.

GERMA 1 RC and 1 Receiver GERMA 433Mhz Universal Wireless Remote Control Switch DC 12V 2CH RF Relay Receiv

Product information

You may also be interested in