Terlans Shellac Pad - Gomalak and Riding Ball

Shellac is best applied with a shellac riding ball. Shellac application ball

it is produced by squeezing clean cotton fibers and making a tampon in a cotton cloth.

it does not leave any fiber or trace on the surface during and after the application. Application: - the wooden object is first sanded for a smooth surface.

- after sanding, the surface is preferably oiled with linseed oil if protection against moisture is desired and left to dry (ideally wait for a day).

- the next day, the surface is sanded again very finely and cleaned of dust.

the shellac polish is shaken before use.

the shellac application ball is glued to the bottle, sucking it several times and applying it to the surface in a circular way.

this process is repeated several times at 15-minute intervals. The more polish applied, the brighter the wood becomes and the more vibrant it appears.

important note:if the shellac spreading ball is placed in a jar with a little alcohol added on it and closed tightly after each use, it will be perfectly protected and stored away from sun and light